Миний зарууд Нэвтрэх ба бүртгэл
Зар нэмэх

Arctic mx-6 ultimate performance thermal paste

УБ — Сүхбаатар, Сүхбаатар, Хороо 9
Нийтэлсэн: 2024-10-29 17:29 Зарын дугаар: 7979072
Arctic mx-6 ultimate performance thermal paste-1 Arctic mx-6 ultimate performance thermal paste-2 Arctic mx-6 ultimate performance thermal paste-3 Arctic mx-6 ultimate performance thermal paste-4 Arctic mx-6 ultimate performance thermal paste-5 Arctic mx-6 ultimate performance thermal paste-6 Arctic mx-6 ultimate performance thermal paste-7 Arctic mx-6 ultimate performance thermal paste-8 Arctic mx-6 ultimate performance thermal paste-9 Arctic mx-6 ultimate performance thermal paste-10

ARCTIC MX-6

ULTIMATE Performance Thermal Paste

TECHNICAL SPECIFICATIONS

General Data

•Viscosity: 45.000 poise

•Density: 2.6 g/cm³

•Continuous Use Temperature: -50~150 ℃

•Volume Resistivity: 1.8 x 1012 Ω-cm

•Breakdown Voltage: 7.5 kV/mm

•Thermal Conductivity: FAQ

•Colour: Grey

20% Better Performance

With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4. The basis for calculation is the temperature difference between the cooler base and the heat source (in C) in relation to the applied heat load (in W), which also results in the unit C/W. The higher the thermal resistance, the worse the heat can be transferred through the TIM layer. Thermal insulators, as an example, therefore always have a particularly high thermal resistance, while thermal interface materials usually have a particularly low one.

MX-6_viscosity_EN

Optimal Consistency for Every Application

Depending on personal preference and area of application, a thinner or thicker thermal compound may be preferred. Excellent non-drying and non-bleeding properties ensure constant long-term performance. With ARCTIC thermal pastes you will find the optimal viscosity for your application.

MX-6_proven-quality

Proven Quality

We are proud of our thermal pastes. With over 20 years of experience in the PC cooling market the MX-6 was developed with the goal to offer a first-class product at a fair price. The optimized formula is based on the proven MX-4, one of the best-selling thermal pastes in the world. The focus was on versatile application possibilities and an easy-to-use consistency.

MX-6_simply-the-paste

Simply the Paste

The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.

MX-6_no-risk

Risk-Free Application

MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.

MX-6_scope

Versatile Range of Applications

With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the Pump-Out Effect🛈. It's also suitable for direct-die cooling scenarios which occur, for example, with graphics cards or console processor GPUs.

MX-6_sizes

Available in Several Versions

ARCTIC MX-6 is available in package sizes from 2 to 8 grams. Resealable syringes prevent the paste from drying out and facilitate dispensing. Alternatively, the variants with MX Cleaner are available. These enable simple and residue-free cleaning of the contact surfaces. The cleaner consists of 100% Limonene, a natural substance obtained from citrus essential oil, which is completely biodegradable.

MX-6_authenticity

100% Original Through Authenticity Check

To ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes.

Easy Application

Thanks to its consistency, MX-6 is easy to apply even for beginners. In the video, we show how it can be applied to avoid air pockets between the processor and the cooler.

CHOOSE VARIANT

Content:

2 g - 30.000₮

4 g - 50.000₮

8 g - 90.000₮

Ижил зарууд



50,000
Дугаар харах
7000-XXXX
Луйвраас хэрхэн сэргийлэх талаар уншаарай. Зөвлөгөөг дагаж сэрэмжтэй байна уу.
GreenIT
Баталгаажсан хэрэглэгч

Элссэн огноо 5-р сар, 2018

Зарын эзний бусад зарууд
Хуваалцах
×

You need to pass document verification to proceed
Take a photo of document
Scan your face by camera
Pass document verification
After passing documents verification you will be able to create ads and contact sellers.
Your document verification is now being processed.
This usually takes up to 60 minutes.
After passing documents verification you will be able to create ads and contact sellers.
Error 400
Хайлтаа хадгалаарай
Хайлтын илэрцийн хуудас дээрх "Хайлт хадгалах" товчлуур дээр дарна уу.
Таалагдсан хэсэг дэх шинэчлэлтүүдээ шалгана уу.
Таалагдсан зарууд уруу нэмэх
Энэ зарын "Одыг" дарж, "Таалагдсан" хэсэгтээ оруулбал дахин олоход хялбар байх болно.